DIP

SPA10AB
SPA Series
Single In-line Package DIP

DIP SPA product image

Image shown represents the product series and may not indicate the actual part number

The SPA series single in-line package DIP saves PCB space because of its thin single In-line packaging. Its retention feature holds part to PCB, prior to soldering – and its high-pressure contact system does not require tape sealing. C&K’s SPA switch is typically used for function controls, logic switching and address switching in industrial applications.

Features and Benefits

  • Thin Single In-line Packaging saves PCB space
  • Retention feature holds part to PCB prior to soldering
  • High pressure contact system does not require tape sealing

Typical Applications

  • Address switch for industrial controls
  • Logic switching for computers and peripherals
  • Function controlling for numerous applications

Specifications

  • Contact Rating:

    Carry: 10 mA @ 5VDC; Switching: 0.1 mA @ 0.1m VDC min.

  • Electrical Life:

    1,000 cycles min.

  • Contact Resistance:

    50 milliohms max. @ 20 V DC 10mA.

  • Insulation Resistance:

    100 megohms min. @ 100 V DC.

  • Dielectric Strength:

    1 minute @ 300 V AC

  • Operating Temperature:

    -30°C to 60°C

  • Solderability:

    DIP & look solderability testing per C&K spec. #448. Unplated edges of terminals permitted

SPA10AB

  • Most Common:

    Yes

  • Current Rating:

    10mA

  • Circuit:

    SPST

  • Mounting Type:

    Thru-hole

  • Sealing:

    Unsealed

  • Illumination:

    No/None

  • Number of Positions:

    10

  • Electrical Life Cycles:

    1,000

  • Pitch:

    0.100" (2.54mm), Full

  • Termination Style:

    Thru-Hole, Right Angle

  • Height Above Board:

    0.169" (4.30mm)

  • Actuator Type:

    Slide (Standard)

  • Actuator Level:

    Flush, Recessed

  • Washable:

    Yes

  • Process Features:

  • Contact Material:

    Beryllium Copper

  • Contact Finish:

    Gold

  • Voltage Rating:

    20VDC

  • Packaging:

    Tube