SD07H1SB
Sd0 Series
Low Profile DIP
Image shown represents the product series and may not indicate the actual part number
Toolbox
Downloads
The SD series from C&K are long lasting, high quality low profile DIP switches that are available in thru-hole or surface mount models and with tape or reel packaging. The SD series’ low-profile design saves space and are perfect to power address switches for industrial controls, logic switching for computers and various function controls.
Features and Benefits
- Low profile design saves space
- Thru-hole and surface mount models
- Tape and reel packaging available
Typical Applications
- Address switch for industrial controls
- Logic switching for computers and peripherals
- Function controlling for numerous applications
Specifications
-
Contact Rating:
Carry: 100 mA @ 50 V DC max.; Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max.
-
Electrical Life:
2,000 make-and-break cycles at full load, each circuit.
-
Contact Resistance:
Below 50 milliohms typ. Initial @ 2-4 V DC, 100mA.
-
Insulation Resistance:
10⁹ ohms min.
-
Dielectric Strength:
500 V RMS min. @ sea level between adjacent terminals
-
Operating Temperature:
-40°C to 85°C
SD07H1SB
-
Most Common:
No
-
Current Rating:
100mA
-
Circuit:
SPST
-
Mounting Type:
SMT
-
Sealing:
Unsealed
-
Illumination:
No/None
-
Number of Positions:
7
-
Electrical Life Cycles:
2,000
-
Pitch:
0.100" (2.54mm), Full
-
Termination Style:
Gull Wing
-
Height Above Board:
0.180" (4.57mm)
-
Actuator Type:
Slide (Standard)
-
Actuator Level:
Raised
-
Washable:
Yes
-
Process Features:
Tape Seal
-
Contact Material:
Beryllium Copper
-
Contact Finish:
Gold
-
Voltage Rating:
25VDC
-
Packaging:
Tube