With an extended actuator for easy actuation and an open bottom construction that allows for solder washing without the need for a tape seal, BD series standard profile DIP switches from C&K are used by designers for function controlling, logic switching in computers and peripherals and industrial control address switches.
|Contact Rating:||Carry: 100 mA max. @ 50 V DC.; Switch: 100 mA max. @ 5 V DC or 25 mA max. @ 25 V DC|
|Electrical Life:||10,000 make-and-break cycles at full load, each circuit|
|Contact Resistance:||Below 50 milliohms typ. Initial @ 2-4 V DC 100mA|
|Insulation Resistance:||10⁹ ohms min.|
|Dielectric Strength:||500 V RMS min. @ sea level between adjacent terminals|
|Operating Temperature:||-40°C to 85°C|
|Solderability:||Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging)|
|Address switch for industrial controls|
|Logic switching for computers and peripherals|
|Function controlling for numerous applications|
Select products from the configurator to compare features.
The quickest way to find a solution and overcome your toughest engineering challenges is to let us help you. Our team of product, market and engineering specialists are here to provide expert advice and show you what C&K has to offer.